Searching for Stay-Brite Solder Jewelry information? Follow the links below to find all the information you need and more.
https://www.esslinger.com/stay-brite-solder-and-flux-kit-for-jewelry/
It has a thousand and one uses, it can be used for items such as, electronics, toys, collectables, jewelry, jump rings, chains and earring parts. The Stay Brite Solder flows at temperatures much lower than the easy, medium and hard solder used in construction of jewelry, meaning that it can be used on almost any metal, except for aluminum.
https://www.jewelrysupply.com/Stay-Brite-Solder-wFlux_p_10450.html
Stay Brite Solder should be used with a soldering iron or torch. This is a silver bearing solder that flows at only 430 degrees, making it an excellent choice for use on Silver, Pewter, Nickel, Copper, or almost any other metal. Stay Brite Solder retains its' bright, shiny look even after hardening. Size: 1/2oz
https://www.esslinger.com/staybrite-silver-bearing-solder-one-pound-or-1-4-lb-coil/
Stay Brite is a high strength, silver bearing solder. With a low melt/flow point of just 430°F (221°C), it produces a stronger solder joint than high heat brazing, which weakens base metals. Stay Brite solder bonds with all metals, ferrous and non-ferrous. Tensile strength is 10,000 to 25,000 PSI; elongation is 48%, vibration resistant.
https://www.etsy.com/listing/886005419/new-100-lead-free-solder-silver-kit-stay
Stay-Brite produces an overall component with greater strength than a brazed component whose base metals are weakened by annealment from high brazing heat. Stay-Brite solders bond with all of the ferrous and nonferrous alloys except aluminum. Melting points - has a solidus of 430°F (221°C) and a liquidus of 535°F (652°C).
https://orchid.ganoksin.com/t/stay-brite-solder/7740
Hello Sue, Stay Brite and other brands of soft solder only work well when you are soldering together two flat sur faces. If you solder a jump ring upright to a flat disc, you can then soft solder the disc to a plate. If you had tried to soft solder the jump ring directly to the plate, it would just break off. Before
https://www.harrisproductsgroup.com/en/Products/Alloys/Soldering/Lead-Free-Solders/stay-brite.aspx
Description: Stay Brite® Lead-free Solder Stay Brite® solders bond with all of the ferrous and nonferrous alloys. Joints soldered with Stay Brite® solders exhibit considerably higher than necessary elongation for sound, dissimilar metal joints and vibration applications.
We hope that you have found all the necessary information about Stay-Brite Solder Jewelry using the links above.
